RailEasy™ Stud Assembly
The RailEasy™ Stud Assembly is designed for cable railing applications on straight and angled (stair spacers are available for angles upon request) runs by drilling through the post and fixing it to the back side. Tighten locking nut to tension the cable and cut off excess thread to fit acorn nut for a finished look.
GRADE: 316L Stainless Steel
| ITEM | A (CABLE) | B | C | D | QTY | WT (LB) |
| 2-Pack | ||||||
| C0980-0004-2 | 5/32˝ | 1/4˝ – 28 | 4.50˝ | 1.50˝ | 2 | 0.25 |
| Single – 3/16˝ ONLY | ||||||
| S0980-0005 | 3/16˝ | 1/4˝ – 28 | 4.50˝ | 1.50˝ | 1 | 0.16˝ |
RELATED PRODUCTS
RailEasy™ Tensioner
The RailEasy™ Tensioner is the primary cable railing tensioning/fastening device.
Acorn Nut Set
The Acorn Nut is designed for use with HandiSwage™ swage studs and RailEasy™ Stud Assemblies.
Stair Spacer
Ideal for stair applications where a “through post” fitting is being utilized to achieve an angled cable run.
Microfiber Polishing Cloth
The Microfiber Polishing Cloth effortlessly polishes and cleans all metals, plastics and fiberglass.