RailEasy™ Flush Fitting
The RailEasy™ Flush Fitting is ideal for cable railing applications where “through post” hardware is desired for minimal obstruction. It uses a self-locking mechanism to attach to 5/32″ diameter cable. The cable is pulled through the fitting and the excess is cut off. A tensioning device must be used at the opposite end of the cable run for tensioning capabilities. For a finished look, affix a Deluxe or HandiSwage™ Cover Nut Set (sold separately) to the end.
GRADE: 316L Stainless Steel
| ITEM | A (CABLE) | B | C | D | E | F | G | QTY | WT (LB) |
| C0981-P004-2 | 5/32˝ | 0.37˝ | 1.16˝ | 0.57˝ | 1.42˝ | 0.26˝ | 0.44˝ | 2 | 0.06 |
RELATED PRODUCTS
RailEasy™ Tensioner
The RailEasy™ Tensioner is the primary cable railing tensioning/fastening device.
Deluxe Cover Nut Set
The Deluxe Cover Nut Set is designed for use with the HandiSwage™ Studs and RailEasy™ Stud Assembly.
HandiSwage™ Cover Nut Sets
Designed for use with HandiSwage™ Studs and RailEasy™ Stud Assembly.
Release Tool
The Release Tool is used to release “self-locking” RailEasy™ and HandiSwage™ Flush Fittings from the cable.