Stainless Driver Bits – Phillips
The Phillips Head Stainless Driver Bits are available in #2 and #3 sizes and 1″ and 2″ lengths. They are offered in a quantity of 2, however, bulk orders are available upon request. Using stainless driver bits prevents contamination of stainless screw heads. Using typical steel bits can cause stainless fasteners to stain if stripping occurs during installation.
NOTE: Part Numbers shown are for 2 packs. However, bulk orders are available upon request.
GRADE: 410 Stainless Steel
| ITEM | SIZE | LENGTH | PACK / QTY | WT (LB) |
| 410 Stainless Steel | ||||
| E0101-PH02-C-2 | #2 | 1˝ (25mm) | 2 | 0.04 |
| E0101-PHL2-C-2 | #2 | 2˝ (50mm) | 2 | 0.06 |
| E0101-PH03-C-2 | #3 | 1˝ (25mm) | 2 | 0.04 |
| E0101-PHL2-C-2 | #3 | 2˝ (50mm) | 2 | 0.07 |
RELATED PRODUCTS
Fastener Lubricant
This Fastener Lubricant contains beeswax. Apply a just a small amount of lubricant to any threaded surface for easier threading.
RailEasy™ Tensioner
The RailEasy™ Tensioner is the primary cable railing tensioning/fastening device.
Stainless Driver Bits – Phillips
The Phillips Head Stainless Driver Bits are available in #2 and #3 sizes and 1″ and 2″ lengths.
RailEasy™ Installation Tools
The RailEasy™ Installation Tools are important when installing a cable railing system.